write about:
- bought matched pairs from Thonk
- don’t swap the pins as the Fuzzbass guide tells you to. it’s fixed on the v4’s from synthcude
- that 10k had to be a 1k on my board; might be due to component tolerances
- yes, some of the synthcube caps are too fat
- watch out for the orientation of the jumpers on the power board
- get the 4x trim pots for freq adjust
- I had the exploding shed nut drivers which helped.
- didn’t bother with dremeling one of the jack housings which got in the way of the screw holding down the filter section
- was able to bend the jack housing fins that might contact the traces